Server Settings for Network I/O Controller

Server Settings

Device's server settings.

Server Configuration

The unit’s server values display when you select Server from the main menu. The following sections describe the configurable parameters on the Server Settings page.

To configure the XPort’s device server settings:

  1. On the main menu, click Server.
  2. Configure or modify the following fields:
    • Server Configuration
      Telnet Password
      Enter the password required for Telnet access.
      Retype Password Re-enter the password required for Telnet access.
    • Advanced
      ARP Cache Timeout
      When the unit communicates with another device on the network, it adds an entry into its ARP table. ARP Cache timeout defines the number of seconds (1-600) before it refreshes this table.
      TCP Keepalive
      TCP Keepalive time defines how many seconds the unit waits during an inactive connection before checking its status. If the unit does not receive a response, it drops that connection.
      Enter a value between 0 and 60 seconds. 0 disables keepalive. The default setting is 45.
      Monitor Mode @ Bootup
      Select Disable to disable entry into the monitor mode using the ‘yyy’ or ‘xx1’ key sequence at startup. This field prevents the unit from entering monitor mode by interpreting the stream of characters that are received during the device server’s initialization at startup.
      CPU Performance Mode
      Select the XPort’s performance mode. Higher performance settings require more energy. Regular is 48 Mhz; High is 88 Mhz. The default is Regular.
      HTTP Server Port
      This option allows the configuration of the web server port number. The valid range is 1-65535. The default port is 80.
      MTU Size
      The Maximum Transmission Unit (MTU) is the largest physical packet size a network can transmit for TCP and UDP. Enter between 512 and
      1400 bytes. The default is 1400 bytes.
  3. When you are finished, click the OK button.
  4. On the main menu, click Apply Settings.

 

 

-> Next, proceed to Connection Settings, or go back to Webserver Configuration Main Page.